These non-woven abrasive wheels are for fine finishing using machines with 19mm keywayed shafts.

Fast Grinder Non-Woven Wheels are made with conformable non-woven abrasive flaps which give consistent performance in applying satin finishes to stainless steel and other metals such as brass and aluminium.

Non-woven wheels for manual satin finishing, soft and flexible. To satin and remove oxidations from all metal surfaces.
The non-woven wheel is light and does not overheat, does not vibrate, is silent and can be used both dry and wet.

They will also clean, remove light coatings and tarnishing. 

For use on satinising machines with 19mm keywayed shafts, such as FiniMaster Basic, PTX, EDX and others.

Specification:

• Made with non-woven abrasive flaps.
• For mounting on 19mm keywayed shafts.
  
• Max 5,700rpm.
• Coarse - 80 Grit
• Medium - 150 Grit
• Fine - 240 - 280 Grit
• Very Fine - 400 Grit
• Ultra Fine - 600 Grit