These Roloc Lockit compatible quick change felt discs can produce fine polished finishes on metal. They can also be used on wood and fillers. 

They are for use with suitable polishing compounds, such as PV102 to mirror polish stainless steel.

We suggest keeping separate discs for different grades of polish to avoid cross-contamination.

Final polishing is usually better achieved at lower speeds with a polisher or rotary sander, for example.

They can also be used with suitable polishing machines and polish compounds on other surfaces where attention to small areas is required.

Specification:

• Twist button mounted, compatible with Roloc and Lockit.
• 50mm or 75mm options (Tip: Use unitised 75mm discs on 50mm holder to give a usable edge for detailed polishing.)
• Use with polishing soaps and compounds for mirror polish finishing
• 6mm felt thickness for long life.
• Max speeds: 50mm: 18,000rpm. 75mm: 12,000rpm (For best results when fine polishing, suggested speed 6,000rpm or slower.)
• Suitable for Stainless Steel, Copper, Aluminium
• Backing pads available with 6mm shaft or M14 thread.
• Roloc holders available Click Here

(Roloc and Lockit are trademarks of 3M Corp and Cibo Abrasives respectively.)